FEATURES:

• MCU: LPC2129 16/32 bit ARM7TDMI-S™ with 256K Bytes Program Flash, 16K Bytes RAM, RTC,4x 10 bit ADC 2.44 uS, 2x CAN, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• two on board voltage regulators 1.8V and 3.3V with up to 800mA current
• single power supply: +5VDC required
• power supply status LED
• power supply filtering capacitor
• two channel RS232 interface
• RESET circuit with exterman control of Philips ISP utility via RS232
• RESET button
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET vontrol by RS232
• 10 Mhz crystal
• extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: 76x55 mm (3.0x2.2")
• space between the pin rows: 48.26 mm (1.9")

• LPC-H2129.pdf
• LPC-H212x.chm

• LPC-H212X-REV0 2004 schematic old revision for customers who bough boards from this revision
• LPC-H212X-REV.A 2005 schematic latest revision

• Port toggle
• RS232 echo port
• OpenOCD + Eclipse set of projects 1.00 include flash write make file for LPC-H2129. The complete list of projects included is here.

ORDERING CODES:
		LPC-H2129 - assembled and tested board, includes LPC2129 microcontroller