LPC-P1114 DEVELOPMENT PROTOTYPE BOARD FOR LPC1114 CORTEX M0 ARM MICROCONTROLLER

MICROCONTROLLER FEATURES:

• LPC1114 Cortex-M0, up to 50 Mhz
• 32 kB Flash, 8kB SRAM,
• UART RS-485, two SSP, I2C/Fast+
• 42 GPIO pins,
• 4 TIMERS/COUNETRS, CAPTURE,
• WDT
• Serial Wire Debug.
• High-current output driver (20 mA) on one pin.
• High-current sink drivers (20 mA) on two I2C-bus pins in Fast-mode Plus.
• Integrated Power Management Unit, Three reduced power modes: Sleep, Deep-sleep, and Deep power-down.
• Single 3.3 V power supply (2.0 V to 3.6 V).
• 10-bit ADC with input multiplexing among 8 pins.
• GPIO pins can be used as edge and level sensitive interrupt sources.
  

BOARD FEATURES:

• MCU: LPC1114 Cortex-M0, up to 50 Mhz, 32 kB Flash, 8kB SRAM, UART RS-485, two SSP, I2C/Fast+, ADC
• Power supply circuit
• Power-on led
• USB connector only for power supply, not USB functionality
• Debug interface – SWD (Serial Wire Debug)
• UEXT connector
• Eight user leds
• Two user buttons
• Reset button
• Prototype area
• FR-4, 1.5 mm, soldermask, component print
• Dimensions:80x50mm (3.15 x 1.97")

DOCUMENTS:

• LPC-P1114.pdf users manual

• LPC-P1114 schematic
• ARM JTAG connector (TOP view)

• LPC1114 demo project for EW-ARM

ORDERING CODES:
		LPC-P1114 - completely assembled and tested board, includes LPC1114 microcontroller