LPC-P2138 PROTOTYPE FOR LPC2138 ARM7TDMI-S MICROCONTROLLER

FEATURES:

• MCU: LPC2138 16/32 bit ARM7TDMI-S™ with 512K Bytes Program Flash, 32K Bytes RAM, RTC, 8x 10 bit ADC 2.44 uS, 2x UARTs, I2C, SPI, 2x 32bit TIMERS, 8x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHz operation
• standard JTAG connector with ARM 2x10 pin layout for programming/debugging with ARM-JTAG
• on board voltage regulator 3.3V with up to 800mA current
• single power supply: 6V AC or DC required
• power supply LED
• two status LED
• power supply filtering capacitor
• two channel RS232 interface
• Li-ion 3V battery holder
• RESET circuit with exterman control of Philips ISP utility via RS232
• RESET button
• two user buttons
• two RS232
• DBG jumper for JTAG enable
• BSL jumper for bootloader enable
• JRST jumper for enable/disable external RESET vontrol by RS232
• 14.7456 Mhz crystal on socket, allow easy communication setup (4x PLL = 58,9824 Mhz CPU clock)
• 32768 Hz crystal and RTC backup battery connector
• extension headers for all uC ports
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: xx x yy mm (x")

• LPC-P2138.pdf
• LPC-P2138.chm

• Schematic

• RS232 initialization demo code
• RTC initialization demo code
• Blink LED and buttons demo code
• OpenOCD + Eclipse set of projects 1.00 include flash write make file for LPC-P2138. The complete list of projects included is here.

ORDERING CODES:
		LPC-P2138 - assembled and tested board, includes LPC2138 microcontroller