Text only | Text with Images

Olimex Support Forum

DUINO => PINGUINO => Topic started by: Shando on September 13, 2013, 02:24:43 AM

Title: PINGUINO 32 with MOD-GSM and MOD-GPS
Post by: Shando on September 13, 2013, 02:24:43 AM
Hi All,

Has anyone successfully attached both of these modules to a PINGUINO at the same time?

I am trying to work out how to do this for a POC that I am involved with. Is it as simple as connecting the MOD-GSM via UEXT and then connecting the MOD-GPS via UART1 using Pins 50 & 51? Or, does MOD-GPS require more connectivity (Unfortunately I am unable to find much detail on the GlobalTop module used)?

Any help would be greatly appreciated.

Regards

Shando
Title: Re: PINGUINO 32 with MOD-GSM and MOD-GPS
Post by: LubOlimex on September 23, 2013, 01:03:41 PM
Hello Shando,

Yes. Its just RX and TX it is recommended to check the available software example: https://www.olimex.com/Products/Duino/PIC32/_resources/PINGUINO_MODGPS_example_v.1.1.zip (https://www.olimex.com/Products/Duino/PIC32/_resources/PINGUINO_MODGPS_example_v.1.1.zip)

I've added some more info and resources about MOD-GPS overhere: https://www.olimex.com/wiki/MOD-GPS (https://www.olimex.com/wiki/MOD-GPS).

Best regards,
Lub/OLIMEX
Text only | Text with Images