we are preparing for production 4.3" LCD module:
http://olimex.wordpress.com/2012/11/21/a13-lcd43ts-4-3-lcd-with-touchscreen-for-eur-35-is-preparing-for-production/
Any news on this topic?
we got already a your 7" LCD with touch screen however we need a smaller one
in case could you provide the same LCD interface to be used for a different size LCD panel.
Thanks
Sorry, just seen now in the A13 section
I'm triying to plug a A13-LCD43TS on a cubieboard I followed the schematics file of the screen module to make the conections but it didn't work as expected. Can anyone give me some feedback or information on that?
Thank's
It would certainly help if you described in more detail what it is that does not work as expected...
Yes for sure, what I did is connect the lcd to the cubieboard folowing this document: https://www.olimex.com/Products/OLinuXino/A13/A13-LCD43TS/resources/A13-LCD4_3.pdf and that one http://linux-sunxi.org/Cubieboard#Expansion_ports assuming that lcdd0 to lcdd23 on cubieboard connects with RGB pins on olimex. It didn't work as expected because it don't shows anything on the screen and the lcd driver is activated. I used the same flat wire shipped with the lcd to make the connections and I didn't use any external source for the lcd.
cubie a13-lcd4.3
(1)d0 gnd 5v gnd
d2 d1 3.3v gnd
d4 d3 r0 r1
d6 d5 r2 r3
gnd d7 r4 r5
d9 d8 r6 r7
d11 d10 g0 g1
d13 d12 g2 g3
d15 d14 g4 g5
d16 gnd g6 g7
d18 d17 b0 b1
d20 d19 b2 b3
d22 d21 b4 b5
vsyn d23 b6 b7
clk hsyn --- ---
pwmbl de clk de
tpy1 tpx1 --- ---
tpy2 tpx2 pwre bkl
bkl gnd tpx2 tpx1
sda sck tpy1 tpy2
spdif gnd
5v 3.3v
--- ---
--- ---