Hello, my board will not boot from original SD card bought from Olimex (Android/Debian). I tried playing with script.bin/fex, no result. What I get on the UART is
a10_Lime_debian_3.4.90_release_3:
U-Boot SPL 2014.04-10675-g44b53fd (May 23 2014 - 13:02:55)
Board: A10-OLinuXino-Lime
DRAM: 512 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600
U-Boot SPL 2014.04-10675-g44b53fd (May 23 2014 - 13:02:55)
Board: A10-OLinuXino-Lime
DRAM: 0 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
MMC Device 0 not found
spl: mmc device not found!!
### ERROR ### Please RESET the board ###
a10_lime_android_SD_Olimex_release_1:
U-Boot SPL 2013.10-rc2-08405-g1b1908c-dirty (Nov 19 2013 - 16:46:29)
Board: A10-OLinuXino-Lime
DRAM: 0 MiB
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600
Does please anyone have any idea what is wrong?
Problem solved ! We have some damaged A10 with malfunction RAM... apparently
Quote from: Deepace on September 29, 2014, 10:24:12 PM
Problem solved ! We have some damaged A10 with malfunction RAM... apparently
Not exactly what you really want to hear. Surely QA on all units should have detected this at manufacture?
Depending on your location this can be expensive to send back for testing.