Error in STM32-E407 user manual?

[unlink]

Hi,

I'm doing some experiments with the board in the subject and I noticed (after hours of trials unfortunately) that the picture in the manual shows the USB-OTG#1 and UTB-OTG#2 connectors flipped with respect to the schematics.






The USB-OTG#2 connector should be the one near the DC power connector.

[LubOlimex]

Sure it is wrong, the white print behind each connector shows it too. If you look in the picture you embedded it is clear that the bottom connector has USB_OTG2 printed behind it.