≡
[00:47:30] <clarity> "GPIO1, GPIO3 are used for USB programming, they can be freed up if you won’t further program the
[00:47:33] <clarity> boar via USB"
[00:47:48] <clarity> Weird
[00:48:49] <clarity> I would try grounding gpio0
[00:52:35] <clarity> Ah yea gpio1 and gpio3 are for rx/tx
[00:52:42] <clarity> 0 and 2 are for selecting boot mode
[00:53:43] <clarity> schematic only describes spi flash and download modes and gpio0 has a pull-up so it should boot from flash by default
[02:05:46] <NoImNotNineVolt> all the stuff i've read made it seem like you just plug it in and go
[05:42:48] <NoImNotNineVolt> aha, found the 'bootstrapping pins settings' on the schematic, thanks
IRC #olimex 2024-10-09
[00:47:20] <clarity> "GPIO0, GPIO2 are boot mode bootstrap pins make sure they are properly configured during power up"[00:47:30] <clarity> "GPIO1, GPIO3 are used for USB programming, they can be freed up if you won’t further program the
[00:47:33] <clarity> boar via USB"
[00:47:48] <clarity> Weird
[00:48:49] <clarity> I would try grounding gpio0
[00:52:35] <clarity> Ah yea gpio1 and gpio3 are for rx/tx
[00:52:42] <clarity> 0 and 2 are for selecting boot mode
[00:53:43] <clarity> schematic only describes spi flash and download modes and gpio0 has a pull-up so it should boot from flash by default
[02:05:46] <NoImNotNineVolt> all the stuff i've read made it seem like you just plug it in and go
[05:42:48] <NoImNotNineVolt> aha, found the 'bootstrapping pins settings' on the schematic, thanks
