≡
Products Price List

ESP32-S3-DevKit-Lipo  

ESP32-S3-DevKit-Lipo - Open Source Hardware Board
ESP32-S3-DevKit-Lipo - Open Source Hardware Board ESP32-S3-DevKit-Lipo - Open Source Hardware Board ESP32-S3-DevKit-Lipo - Open Source Hardware Board
ESP32-S3-DevKit-Lipo development board for ESP32-S3 with 8MB RAM and 8MB Flash capable to run Linux Kernel 6.3

Select Product Variant

  • ESP32-S3-DevKit-Lipo
  • ESP32-S3-DevKit-Lipo-EA
Price12.00 EUR
10 - 49 pcs11.40 EUR
50 - 10000 pcs10.80 EUR
In Stock
ESP32-S3-DevKit-Lipo is OSHW certified Open Source Hardware with UID BG0000108

ESP32-S3 is a dual-core XTensa LX7 MCU, capable of running at 240 MHz. Apart from its 512 KB of internal SRAM, it also comes with integrated 2.4 GHz, 802.11 b/g/n Wi-Fi and Bluetooth 5 (LE) connectivity that provides long-range support. It has 45 programmable GPIOs and supports a rich set of peripherals. ESP32-S3 supports larger, high-speed octal SPI flash, and PSRAM with configurable data and instruction cache.

ESP32-S3-DevKit-Lipo comes with PCB antenna as seen on the picture above, ESP32-S3-DevKit-Lipo-EA comes with U.FL connector and an external antenna.

FEATURES

  • ESP32-S3-WROOM-1-N8R8 8MB RAM 8MB flash
  • Green status LED
  • Yellow battery charge LED
  • pUEXT 1.0mm step connector
  • USB-C for power supply and USB-serial programmer
  • USB-C for OTG JTAG/serial connector
  • LiPo battery charger
  • LiPo battery connector
  • External power sense
  • Battery measurement
  • Automatic power supply switch between USB and LiPo
  • RESET button
  • USER button
  • Dimensions: (1.1 x 2.2)" ~ (27.94 x 55.88)mm

DOCUMENTS

HARDWARE

SOFTWARE

COMMUNITY

FAQ

  • What is the current consumption of ESP32-S3-DevKit-Lipo in deep sleep mode? 
  • Consumption in deep sleep mode for ESP32-S3-DevKit-LiPo should be approximately around 200uA when powered from Li-Po battery over the Li-Po connector. The module consumes 7uA, the SY8089AAAC around 50uA, the CH340X between 50uA and 150uA (in standby mode). Usually boards with built-in USB can go lower, like ESP32-S2-DevKit-Lipo-USB can go down to 20uA or ESP32-H2-DevKit-LiPo can go down 10uA.